|
The
Powder Coating Advantage
At Cast
Plus, Inc., powder coating is not just black and white. The many
benefits of powder coatings are offered in a wide variety of
tough, durable, price-competitive coatings in colors and
textures often not available from most liquid painters or
E-coatings.
Powder
coatings resist marring and chipping that often occurs during
shipping and the durability of a powder coat finish allows for
parts to be post-machined. The following cast aluminum TorqPlus™
Electric Actuator housing manufactured by Bettis Actuators and
Controls are machined and assembled after powder coating at Cast
Plus, Inc.
|
Durable
Surface Finish |
| Powder
coating produces a durable surface finish that allows
machining operations to be performed on the part after
the powder coating process. Try that on a painted part. |
 |
|
Bettis
TorqPlus™ Electric Actuator |
Some
coatings are formulated to be very resistant to corrosion,
abrasion, and chemicals. Other coating formulations combine
these properties with exterior durability such as the hand rails
manufactured by Appian Manufacturing on this Kawasaki Loader:
| This
65TM Kawasaki Loader appears courtesy of Kawasaki
loaders. The hand rails are manufactured by Appian and
powder coated by Cast Plus, Inc. |
 |
|
Appian
Manufacturing Corp.
2025
Camaro Avenue
Columbus,
Ohio 43207
Phone:
614-445-2230
Fax:
614-445-2236
|
With
powder coating, you get a consistent finish, free from sags and
drip marks. The textured or wrinkled powders are an attractive
way to hide surface imperfections. If the color desired is not
found as a stock item from the many powder coat suppliers such
as Morton International, T.C.I., Herberts-Obrien and Prism
Powder Coatings, a custom coating can be formulated to meet the
color, gloss level, texture and performance characteristic
required. Many
powder coatings are formulated for special functions or for
specific uses such as powders with an F.D.A. status. This means
the powder contains ingredients that may be used on products for
processing, handling or packaging food. Because
of the nature of our application, there are no solvents released
during production. The overspray can be reclaimed and re-used
almost eliminating waste. No solvents are needed for clean-up so
health and safety concerns are minimized.
 |
Here
we have a motorcycle stand that has been
powder
coated . |
|
 |
top |
